Operating instructions

ManualsBrandsCDA ManualsMicrowave OvenMV440

Code reading systems

Object recognition

Pat-Genius for MV440

5/50

Siemens ID 10 · 2014

■

Function

Shape detection is an additional function subject to a license

that can be activated on any SIMATIC MV440 by installing the

Pat-Genius license. The functionality is available without a

license in demo mode.

Shape checking detects deviations in the current camera image

relative to a learned structure using edge structures

Accordingly, the basic test sequence is as follows:

• Training the object test parameters using one or more good

objects

• Testing an object and/or pattern with the features taken from

the training

• Testing can be performed on stationary and moving objects

• Checking for a match with the reference provides a

good/poor indication after comparison with set-value criteria

• Test results output to three control outputs:

- OK: Presence of the trained objects and/or pattern found

again using the features;

- OK: Level of agreement greater than setpoint

-...

- N_OK: Presence of the trained object and/or pattern NOT

found again using the features;

- N_OK: Deviation of the level of agreement from the setpoint.

-...

• Output of the result information onboard via PROFINET IO,

Ethernet, RS232 interface – further interfaces available via

communication modules

• "Stand-alone" mode possible using integrated DI/O

• Remote control via PROFIBUS IO, PROFINET DP (via commu-

nication module), DI/O or Ethernet

• Platform-independent, web-based interface - Internet-en-

abled:

- Monitoring (live image in read mode)

- Diagnostics (fault image, log information, ...)

- System administration (software update, ...)

- Error analysis for troubleshooting for faulty readings

• Triggering of external ring lights

The overall result and the components of a measurement result

can be output after a test via different interfaces, and are then

available for further processing on an external system, e.g. for

archiving or creating a test report.

ID10_2014_EN_NEW.book Seite 50 Mittwoch, 11. Dezember 2013 11:05 11