Operating instructions
Wall
or
Machine Mounting
(continued)
Figure 3. 1 • Removing the PC40
fro
nt assembly
1 - Back enclosure
2-
Front assembly
3
- Screw {1
of
6)
DIN Rail Mounting
0
NO<dson
Corpor
a ~
on
1993
AI RtghU Reserved
Installation 3-3
NOTE: Before mounting the PC40, make sure that you have sufficient
space
to
mount it. The unit is 4.0 in. wide (10.2 em)
by
9.0 in. high (22.9
em)
by 4.44 in. deep
(11
.3 em).
Use the parts provided with the
PC40 (Figure 3.3)
to
install the unit to
DIN rails as follows:
Mounting
to
Vertical Ralls
1. Fasten the end bracket provided with the
un
it to the DIN rail by
tightening the stop
sc
rew (Figure 3.3
).
PIN
108
389A
57
·
28
1/93