Operating instructions

3-4 Installation
DIN Rail Mounting
(continued)
T
A
l
Figure 3.2 - Mounting PG40 to wall or machine surface
A - 6 in. (15 .2 em)
1 - Back enclosure
2- Screw with washer
(nut not shown); 1
of 2
p"" 108 389A
57 .28 1,'g3
2. Use the two M4 x 12 mm screws to secure the two clips to the back
enclosure; make sure that they are oriented for mounting to the
vertical rail (Figure 3.3).
3. Fasten the back enclosure
to the DIN rail by snapping the clips into
the
rail.
C Nordson Corpora1.,n 1993
All Ro gllts Res.rver:l