Operating instructions

Programming Channel
(contin ued)
1
A
Figure 4. 14 - Activa ti ng/deactivating examples
A - First pattern
1 - Gun s: 1 and 4 activ ated ; guns 2 and 3 deactivated
8 -
Sec ond pattern
2 - Guns: 2 a
nd 3 acti va t ed ; guns 1 and 4 deactivated
Operating Instructions 4-19
2
B
Programming Steps to Reactivate or Deactivate a Channel
PIN 15 4 81V.
57-28 1/93
Push Button Sequence Result
1. Look at the initial Channel
selection
level display to
determine which channel(s)
are activated
(
1
l·
2. Press LEFT or RIGHT to 2. The selected channel number is flashing.
move to the channel number
that you want to change.
3.
Press UP and DOWN at the 3. The program remains in the Channel level
same time.
and displays the
new active channel. The
channel state, activated or deactivated, is
reversed.
4. Repeat steps 1 through 3 to
change additional channels.
C
1
)
Activated channel numbers are displayed on the LCD.
0 Nordson Corpora tiOn 1993
All Rights Reserved