Operating instructions

Operating Instructions 4-31
Selecting Available Parameters
(contin ued)
Available Trigger and Edge Choices (continued)
P /1'1 1 08389A
57 - 28 1/93
Trigger Choice
Push Button Sequence
Two Triggers
1. Press
LEFT or RIGHT until trigger
number,
"2", is flashing.
2. Press
SET.
3. Press LEFT or RIGHT to select an
edge symbol (refer
to "Edge Symbol
Choice,"
below).
Edge
Symbol Choice Push Button Sequence
1. Press
LEFT or RIGHT until the
-II
symbol is flashing.
2. Press
SET .
1. Press LEFT or RIGHT until the
---
symbol is flashing.
2. Press SET .
Available Transitions
NOTE: Transitions are made available in pairs (one delay and duration).
Configuration
Choice
One
Transition Pair:
y
(FLASHING)
Two Transition Pairs:
y
(FLASHING)
Three Transition Pairs:
y
(FLASHING)
Four Transition Pairs:
y
(FLASHING)
Push Button Sequence
1. Press LEFT or RIGHT until the
left-most transition
pa ir is flashing.
2. Press
SET .
1. Press LEFT or RIGHT until the
second transition pair from the left
is
flashing. ·
2. Press SET.
1. Press LEFT or RIGHT until the third
transition pair from the left is flashing.
2. Press
SET.
1. Press LEFT or RIGHT until the
right-most transition pair is flashing.
2. Press
SET.
C Nordson Corpor ato n 1 993
All A1ghts Aosorved