Technical data
29
For the Installer
Location
The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space
containing a bath or a shower.
The appliance must not be installed in a bed-sitting room of less than 20m
3
.
The appliance is designed and approved for domestic use only and should not be installed in a commercial ,
semi commercial or communal environment.
Your product will not be guaranteed if installed in any of the above environments and could aect any third
party or public liability insurances you may have.
This can be installed next to a cabinet.
• If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a gap of at least
200 mm must be left between the side of the cooker and the furniture.
• The furniture walls adjacent to the cooker must be made of material resistant to heat.
• The veneered synthetic material and the glue used must be resistant to a temperature of 90°C in order to
avoid ungluing or deformations.
• Curtains must not be tted immediately behind appliance or within 500 mm of the sides.
• It is essential that the cooker is positioned as stated below.
• If the cooker is located on a pedestal it is necessary to provide safety measures to prevent falling out.
• The cooker must be installed by a qualied technician and in compliance with local safety stan-
dards.
650 mm
500 mm
200 mm
450 mm
air vent
Fig. 34










