Technical data

37
Gas Connection
GB
Cat: II 2H3+
The gas supply must use the nearest gas inlet pipe which is located at the left or the right hand side at the rear
of the appliance (g. 45).
The hose should also be connected in such a way that it does not touch the oor.
To screw the connecting tube operate with two spanners (g. 44).
The unused end inlet pipe must be closed with the plug interposing the gasket.
After connecting to the mains, check that the coupling are correctly sealed, using soapy solution, but
never a ame.
Plug
Fig. 44
Fig. 45
Left gas
inlet pipe
Right gas
inlet pipe
1/2” BSP (male)