Technical data

42
GRILL BURNER
• Unscrew and remove the burner securing screw “A” (g. 52).
• Withdraw the burner as shown in gure 53. Take care not to damage the safety valve probe
and the electric ignition electrode.
• Using a 7 mm box spanner, unscrew the injector (indicated by the arrow in g. 53) and replace
it with a new one selected in accordance with the “Table for the choice of the injectors”.
• Regulate the air supply to the grill burner as indicated in the section “REGULATION OF AIR
SUPPLY TO OVEN AND GRILL BURNERS”; then replace the burner repeating the above steps
in reverse order.
 IMPORTANT: Check the correct operation of the safety valve and the electric ignition.
A
Fig. 52
Fig. 53