Technical data

46
Electrical Installation
WARNING! Electricity can be extremely dangerous.
This appliance must be earthed.
Electrical Feeder Cable Connection
To connect the supply cable:
• Remove the screw securing the cover “A” on the rear of the cooker (g. 57).
• Unscrew cable clamp “D” (Fig. 58).
• Connect the wires to the terminal block “B” as shown in the diagram in gure 59.
• Take up any slack in the cable and secure with the cable clamp “D”.
• Replace the cover “A”.
Feeder Cable Section
Type H05V2V2-F
230 V~ 3 X 0,75 mm
2
(*) (**)
(*) Connection possible with plug and
outlet
(**) Connection with wall box connection.
PEN
L
1
(L2)
230 V
Fig. 59
A
D
B
Fig. 57 Fig. 58