Operating instructions

36
For your safety please read the following
information:
– Connection to the mains must be carried out by qualified technician in
accordance with current regulations.
– The appliance must be connected to the mains checking that the voltage
corresponds to the value given in the rating plate and that the electrical cable
sections can withstand the load specified on the plate.
– The cooker can be connected directly to the mains placing an omnipolar switch
with minimum opening between the contacts of 3 mm between the appliance
and the mains.
– The power supply cable must not touch any hot parts and must be positioned so
that it does not exceed 75°C at any point.
– Once the cooker has been installed, the switch must always be accessible.
N.B. For connection to the mains, do not use adapters, reducers or
branching devices as they can cause overheating and burning.
If the installation requires alterations to the domestic electrical system, call an expert.
He should also check that the domestic electrical system is suitable for the power
absorbed by the appliance.
– The connection of the appliance to earth is mandatory.
The manufacturer declines all responsability for any inconvenience
resulting from the none observance of this condition.
Electrical installation
Before carrying out any work on the electrical parts of the appliance, the
appliance must first be disconnected from the electrical supply.
IMPORTANT: The cooker must be installed in accordance with the
manufacturer’s instructions.
Incorrect installation, for which the manufacturer accepts no responsibility,
may cause injury to persons
, animals or equipment.
IMPORTANT: this cooker must be connected to a suitable double pole control
unit adjacent to the cooker.
No diversity can be applied to this control unit.