Specifications

33
Mains Electricity Connection
Incorrect installation may be dangerous and the manufacturer can not be held responsible.
Warning! This appliance must be earthed. The manufacturer declines all responsibility for any
problem caused by failure to observe this rule.
THIS APPLIANCE MUST BE CONNECTED TO THE MAINS SUPPLY BY A COMPETENT PERSON, USING FIXED
WIRING VIA A DOUBLE POLE SWITCHED FUSE SPUR OUTLET AND PROTECTED BY A 3A FUSE.
We recommend that the appliance is connected by a qualied electrician, who is a member of the
N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.
The wires in the mains lead of this appliance are coloured in accordance with the following code:
Green & Yellow = Earth, Blue = Neutral, Brown = Live.
As the colours of the wires in the mains lead for the
appliance may not correspond with the coloured
markings identifying the terminals connecting to the
fuse spur, proceed as follows:
− The wire which is coloured green and yellow
must be connected to the terminal marked E
(Earth) or coloured green.
− The wire which is coloured blue must be con-
nected to the terminal marked N (Neutral), or
coloured black.
− The wire which is coloured brown must be con-
nected to the terminal marked L (Live), or colou-
red red.
Note: Use a 3A Fuse
Assembly and electrical connection should be carried
out by specialised personnel.
When installing this product we recommend you
seek the help of another individual.
FUSE
DOUBLE POLE SWITCHED
FUSED SPUR OUTLET
ON
Fig. 45
USE A 3 AMP FUSE