Specifications

Lighting of Gas Grill Burner

IMPORTANT: The oven door must be open during this operation.

To light the burner, you need to:

1 Fully open the oven door.

 If this operation is not performed you should not proceed to light the oven.

2 Press the thermostat knob throughly to start up the electric ignition and, keeping the knob under

pressure turn it clockwise (g. 6) to position

(g. 3).

 Never continue this operation for more than 15 seconds. If the burner has still not ignited,

wait for about 1 minute prior to repeating the ignition.

 In case of mains failure, to light the grill manually, put a ame to the right and left side of the bur-

ner (g. 7), then press and turn the thermostat knob (g. 6).

3. Wait about ten seconds after the burner lighting before releasing the knob (priming time of the

thermocouple).

4. Check that the burner has lit; if not, turn the knob anti-clockwise back to “

” (OFF) and repeat the

procedure from step 1.

5. The oven door must always be kept half-open when the grill is in operation.

 For correct use see chapter “TRADITIONAL GRILLING”.

If the ame extinguishes for any reason, the safety valve will automatically shut o the gas supply to

the burner.

To re-light the burner, rst turn the grill control knob to OFF position

(“ ”), wait for at least 1 minute

and then repeat the lighting procedure.

During and after use of the grill, certain parts will become very hot.

Keep children away.

ATTENTION: In case of manual lighting, never turn the thermostat before approaching a ame

to the burner.

Fig. 7Fig. 6