Installation Instructions
v3-0919
16
Programming an Additional or Replacement Remote Control
for the Automatic Horse Walker
Read These Instructions Completely Before Beginning
Note: The circuit board allows for 4 seconds between pressing the Programming Button to activate the
function light, and pressing the corresponding button on the remote.
Touch Screen
Control Panel
Push Button
Control Panel
Fig. 1
Circuit Board Box with
Cover Plate Removed.
Replace cover and secure
after programming remote.
The Remote Control for the Horse Walker comes
pre-programmed from the factory.
Programming is only necessary if additional, or replacement Remote Control is purchased.
See next page for Programming the Remote Control
2