Installation Instructions

v3-0919
4
5. ⅞"

⅝½" bolts.
⅞ 

Horse Walker tree.
⅝½" 


4.        



        





3. 


NOTE: The Base weighs approximately 1200 lb. Be sure the
equipment used for lifting the Base is able to handle this
working weight.





level,







IMPORTANT:
Reverse the 7/8" x 5" bolts through each bracket
in the base of the Tree when installing the Arms.
Bolts must face opposite directions from the
previous bolt to allow room for nuts.
Do not assemble the nuts for the 7/8" x 5" bolts until all arms have been installed.
This will allow bolts to slide back and forth to allow the next arm bolt to be installed.
Once all arms have been installed, then assemble and tightened all nuts.
Install Bolts Through Arms
in Opposite Direction from
Previous Bolt