Installation Instructions

v5-0919

Outer Ring - Second

Following the procedure used for the Inner Ring, locate the Bow Gate for the Outer Ring, directly across from the

Inner Bow Gate at 25'-6". Connect the 3.5' Panel as before. Insert Anchor Stake Clip into bottom of panel leg.

Be sure the holes on the Anchor Stake Clip face outward, away from the center of the ring. After proper clearance

is achieved, drive a Stake through the hole on Anchor Stake Clip, half-way into ground as with the inner ring. Connect an

Outer Panel as in step 1. Place another Panel and continue around Outer Ring. Again, manually turn the Horse Walker

Hanging Panel around to each panel to make sure you have the proper clearance around the entire outer ring.

When all panels are assembled, and proper clearance is achieved, drive all anchor stakes fully.