Installation Instructions

v5-0919
11
Horse Walker Electrical Connections
8
4
5
9
9
5
6
6
7
7
8
8
Touch Screen
Control Panel
1
2
3
Push Button
Control Panel
Terminal Strip
See following page for
full object descriptions
2
3
4
10 11 12
1. Attach each electric wire to each panel by placing the
¼" x ¾" bolts and nuts provided through the drilled hole
on the Short Arm Attachment. (See Step 3 pg. 09)
NOTE:
Be sure enough
slack is given for
panel movement.
Swing Panel several
inches in each direction
to be sure there is ample
free-play in the wire.
2. Attach the other end of each wire to the base of the Tree (See image above).
3. Drive a 6’ ground rod beside the walker base and attach a #6 copper ground wire to
the ground rod and to the green terminal on the charger.
Hanging Panel Electrical Connections
GREEN
TERMINAL