Installation Instructions
v5-0919
ii
Congratulations on choosing
“Priefert’s 6-Horse Panel Walker.”
Priefert Horse Walkers are attractive, durable, and oer more options than
ever before. Top equine professionals from around the world choose our
horse walkers for their reliability and the company that stands behind it.
Priefert products are used and tested in our manufacturing facility and on
the Priefert Ranch. The Priefert family personally tests and uses every
product they build before sharing it with their friends around the world.
“Priefert Equine...Unbridled Commitment”
REMEMBER SAFETY FIRST!
Be Alert - Eliminate unsafe habits and risky behavior,
recognize hazards as they exist and read and follow these
Installation Instructions to successfully assembly the
Priefert 4-Horse Panel Walker.
READ AND UNDERSTAND THESE INSTRUCTIONS
BEFORE BEGINNING INSTALLATION.
Follow all safety warnings and recommendations.
FCC Compliance Statement:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
2
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Using this manual:
These Installation Instructions are a compilation of engineering data and
eld experience, and are designed to help you with proper installation,
safety, operation and adjustments. Read these instructions completely
prior to beginning assembly, and follow the recommendations to help
ensure safe and ecient operation.
The information contained herein was current at the time of printing. Your
model may vary in design and conguration from those shown in this
manual. There is a possibility that some illustrations in our manuals were
of prototype models. Design of production models may vary in detail from
those shown in our manuals.
Priefert Manufacturing maintains an ongoing program of continuous
product improvement. Therefore, Priefert reserves the right to make
improvements or modications in design, or specication changes without
incurring any obligation to replace said items on units previously sold.
Your 4-Horse Panel Walker comes with an instructional DVD and is also
available online in PDF format. Both have been designed to assist you in
achieving optimal results with your Horse Walker.
Terminology
“NOTE:” provides the operator a brief summary of information that will
assist in operating the implement.
“IMPORTANT:” denotes that the following content has signicance in the
operation or maintenance of the implement.
Owner Assistance
If customer service or repair parts are required, contact Priefert
Manufacturing to reach our trained personnel who will assist you with
repair parts and equipment needed to service your Panel Walker. The parts
on your Panel Walker have been specically designed and should only
be replaced with genuine Priefert parts. Therefore, should your Priefert
Panel Walker require replacement parts, contact our Support Center.
Customer Service
Priefert Manufacturing wants you to be satised with your new 4-Horse
Panel Walker. If for any reason you are not satised with the equipment,
the following actions are suggested:
Contact your Priefert Ranch Equipment dealer and discuss any problems
that you may be experiencing. Allow them the opportunity to assist in
correcting any problems that you may be experiencing.
For further assistance contact:
Priefert Manufacturing
Attention: Customer Service
2630 South Jeerson
P.O. Box 1540
Mount Pleasant, Texas 75456-1540
1-800-527-8616
Web-site address:
www.priefert.com
sales.priefert.com