Installation Instructions

v5-0919
Horse Walker Operation Instructions
Speeds Up
Horse Walker
Slows Down
Horse Walker
Fault / Reset
Stops
Horse Walker
Forward/Reverse
Start/Stop
15, 30, & 60
Minute Timer
PUSH-BUTTON CONTROL PANEL
Horse Walker is programmed to require
“reset” if animals stop the walker more than
10 times within 60 seconds, or if the horse
is able to stop the walker for a sustained 10
seconds.
When fault light is illuminated, press and hold
FAULT button for a minimum of 2 seconds. If
fault light does not go o󰀨 and walker does
not reset, contact Priefert at 1-800-527-8616.
No Belts To Burn!
• 25 second “ramp up” time from start to
desired speed setting to ease horse into walk.
• 25 second “ramp down” time from engaged
to stop.
• One of the more unique and outstanding
features of this lead walker is the fact that if
a horse balks and stops the walker, there is
no stress wear on the drive train. The motor
simply pauses and then restarts. Horses
soon respond to the “pressure and release”
training and therefore adapt to the Priefert
walker with less resistance and no negative
impact on the walker itself.
Key Features Fault / Reset
Never leave horses unattended while using Horse Walker.
19