Installation Instructions

v5-0919
02
VERY IMPORTANT!
Horse Walker Assembly
Breather Installation
After locating and leveling Walker Base, Plug must be taken out & breather installed before power is turned on.
The breather is shipped inside the Control Panel with the Remote Control and Antenna.
Open Control Panel Box, remove breather and install BEFORE turning on Horse Walker power.
The gearbox is pre-lled with
Lucas 75w140 Synthetic oil.
Priefert recommends changing the oil after
the rst 250 hours of operation. Oil should
be changed every 500 hours or each year of
operation thereafter, whichever comes rst.
Always replace with Lucas 75w140 Synthetic oil
or equivalent.
Replace
This
With
This
Shipping
Plug
Breather
After locating and leveling
Walker Base
Located
inside
Control Panel