Technical Specs

Fabricant de Contrôle d’Accès depuis 1985 Manufacturing Access Control since 1985
The installer’s choice
The warranty period for this product is 24 months, beginning from the
manufacturer date. During this period, if the product does not work
correctly, due to a defective component, the product will be repaired or
substituted at our discretion. The guarantee does not cover the plastic
container integrity. After-sale service is supplied at the factory.
Manufactured by : CDVI WIreless SPA - Via Piave, 23 - 31020 S.Pietro di Feletto (TV) - Italy
Tel : [phone] - Fax : [phone]
web: www.erone.com - email: [e-mail]
5
Use
7
Memorization
6
Battery Low
8
Guarantee
Beep
BLUE
GREEN
Beep
BLUE
RED
The light of the touch transmitter becomes BLUE when the hand approaches at about 10 cm and becomes GREEN when the hand
touches the surface. The RF transmission starts at the “Beep” of the buzzer.
In case of battery low the GREEN color becomes RED.
For the memorization of the transmitter onto the corresponding receiver, follow the procedure described on the receiver manual.
The touch transmitter is read by any Erone receiver as the button “A”
EU DECLARATION OF CONFORMITY ( DoC)
The company CDVI WIRELESS S.p.A., Via Piave, 23 - 31020 S.PIETRO DI
FELETTO (TV) - ITALY, as manufacturer,
D E C L A R E S
that the DoC is issued under his sole responsibility and belongs to the
following product:
Brand : ERONE
Description : TRANSMITTER TOUCH
Type(s) : TTH2641E1N / TTH2641E1B
is in full compliance with the essential requirements of the European
Directive 2014/53/UE ( RED ):
The appliance full complies with the following Regulations :
 EN 62479:2010
 EN 301 489-1 V2.1.1
 EN 301 489-3 V2.1.0
 EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
 EN 300 220-1 V 3.1.1
 EN 300 220-2 V 3.1.1
S. Pietro di Feletto, 13/6/2017
Ing. G. Massimo Dalle Carbonare
___________________________
(Product manager)
The present document has been issued in compliance with the Directive 2014/53/UE Annex VI
“The device complies with part 15 of the FCC Rules. Operation is subjected to
the following 2 conditions: (1) this device may not cause harmful interference
and (2) this deivice must accept any interference received, including
interference that may cause undesired operation”
RF EXPOSURE WARNING
This EUT is in compliance with MPE for general population / uncontrolled
exposure limits and it had been tested in accordance with the measurement
methods and procedures specied in FCC 47 CFR § 1.1310 and 2.1091
To satisfy FCC RF exposure requirements for mobile transmitting devices,
a separation distance of 20 cm or more should be maintained between the
antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance are not
recommended. The antenna used for this transmitter must not be co-located in
conjunction with any other antenna or transmitter.