Instruction manual

SPECIFICATIONS & PACKAGE CONTENTS
1. The HSMR has been tested extensively and found that it doesn’t require
external power supply. If in rare situation you find it cannot work with the
HSW44C, please use any +5V power supply unit to plug in the power jack
and see if it can work. If not, please contact our technical support for further
service.
2. Additional IR remote control and IR blaster cable can be purchased as
optional accessories to control the HDMI sources located separately.
3. USB or RS-232 control must be connected either one at a time. Connecting
both types of cables may cause command confusion.
Mechanical HSW44C HSMR
erusolcne lateM gnisuoH
Dimensions
(L x W x H)
Model
440 x 290 x 44mm
[1’5” x 11.4” x 1.7”]
85 x 90 x 25mm
[3.3” x 3.5” x 1”]
]”5 x ”4’1 x ”9’1[ mm031x 004 x 035 egakcaP
Carton
280 x 550 x 420mm [11” x 1’10” x 1’5”]
Weight
]zo3.6[ g081 ]sbl 2.7[ g0523 ledoM
]sbl 6.51[ gk 1.7 egakcaP
Fixedness 1U rack-mount with ears Wall-mount with screws
Power supply AC Power 100-240V Not necessarily required
1
Power consumption 60 Watts [max]
1.5 Watt [max] (provided by
HSW44C)
04~0 erutarepmet noitarepO °C [32~104°F]
06~02- erutarepmet egarotS °C [-4~140°F]
]noitasnednoc on[ HR %09~02 ytidimuh evitaleR
Package Contents
1x HSW44C
1x IR blaster
2
2x 1U rack mounting-ear
1x IR remote control
2
1x Instruction manual
4x HSMR
4x IR receiver
8x Wall-mounting screws
1x 5V 6A power supply unit
DISPLAY SIDE
Method A: Push button for switching input channels
Press the INPUT SELECT push button to switch the input source on the respective output
port connected to the matrix receiver in sequential order. The selected input source will
be displayed on the seven segment display of INPUT CHANNEL.
Method B1: IR remote control for switching input channels
Please decide which input channel to be selected by pressing Source Selection 1 to
Source Selection 4. Or you can use left and right
button to enter IR control
mode and select the input channel in ascending and descending order respectively.
The setting will be effective in a couple of seconds.
Switch input port in descending
order*
Switch input port in ascending
order*
SOURCE SELECTION 1
Switch the display channel at the
remote site to input port 1
SOURCE SELECTION 2
Switch the display channel at the
remote site to input port 2
SOURCE SELECTION 3
Switch the display channel at the
remote site to input port 3
SOURCE SELECTION 4
Switch the display channel at the
remote site to input port 4
Note
Right ( ) button to switch input source in ascending order (1, 2, 3, 4, 1, 2, ......)
Left ( ) button to switch input source in descending order (1, 4, 3, 2, 1, 4, ......)
Method B2: IR remote control for controlling the HDMI sources
Users can use the corresponding IR remote to control the HDMI source.
—
—
—