User's Manual

CONNECTION Smartball Slim
4
Connection and Operation
Usage method
1. Battery Installation
Open the back cover, and put the CR2016 battery into the battery case, the back of battery is
upwards, close the back cover.
2. Remove the battery
Open the battery cover and remove the CR2016 battery.
3. Connection status
A) If the product is turned off, long press the product two seconds, enter the power-on status,
the green light flashes three times.
B) Click APP "switch" icon. Connect with the device at the first time, need to choose the
product you used and after that, it will be connected to the device automatically when you click the
icon.
C) Once the connection is successful, the light of product glows green once, and the buzzer
sounds once.
D) In connected status, press the product each time, the green light will flash once.
4. Disconnect status
In connection status, click on the APP "switch" icon, enter the disconnected state, the red light
flashes three times, and as long as the light flashes each time, the buzzer will alarm once.
5. Shutdown status
In boot mode, long press the product two seconds, enter the shutdown status, the red light
flashes twice quickly.
6. Alarm status
In alarm status, double-click on the product, or click "Stop Alarm" button on APP
Wireless Self-timer
Enter the APP camera interface, in connected status, click the product, can be photographed.
7. Bi-directional seeking
Seek for your phone: in connected status, double-click on the product, your phone gets into
bright screen and enters an alarm status, the alarm sound plays in a loop.