User's Manual

Please charge earbuds before wearing them according to user
guidance.
Please do not hit earbuds and charging case severely.
Please do not expose earbuds to benzene and other diluent
chemicals.
Please do not disassemble, repair or modify by yourself.
Please do not listen at high volume for a long me to avoid
hearing impairment.
Please do not expose earbuds to the sun for long.
Please do not keep earbuds in water or damp places for long
periods of me.
Status LED
(invisible when not work )
Ear p
Charging storage case
Charging case
Earbuds
Baery status LED
LED Status for charging case baery:
Blinking red: charging
Solid red: fully charged
Micro USB charging port
Tap here
User
Manual
L S
M
User Manual
1.Product Overview 2. What’s in the package 3. Aenon
Earbuds
Charging case
Charging cable
3 pairs of ear ps
7. Answer call 8. Charging
①When you receive an incoming call, there will be voice prompt
broadcasng caller ID. Tap either earbud twice to answer an
incoming call.
② Tap either earbud twice during a phone call to hang up.
Fully charged case can provide 3 charges to earbuds.
①Insert the Micro USB end of the cable into the Micro USB charging port
on charging case.
Fully charged earbuds can provide up to 6 hours music me.
①The red LED indicator will blink when the earbud baery power is low.
②Place the earbuds into the charging case to get charged.
③Take out the earbuds from the charging case when fully charged, and
they will auto connect to each other.
4.Technical Specificaons
Bluetooth version: V5.0, support auto power on and auto pairing &
connecon
Bluetooth device name: TWS-T04, English voice prompt available
Effecve range: up to 10 meters
Waterproof: IPX5
Sound channel: dual channel stereo
Baery: lithium baery
Earbuds baery: 3.7V, 50mAh
Charging case baery: 3.7V, 350mAh, able to provide 3 charges to
earbuds
Music me: 6H
Frequency response: 20Hz ~ 20KHz
Material: Plasc
9. Trouble shoong
①Bluetooth device cannot be found on mobile phones.
a) Check whether le and right earbuds are paired successfully;
b) If earbuds are sll unable to pair with Bluetooth device, please
place earbuds into charging case and take out again, during which
process Bluetooth earbuds will restart simultaneously.
②Earbuds are frequently disconnected from Bluetooth device aer
their connecon.
a) Earbuds baery power is insufficient. Please charge earbuds as
soon as possible.
b) The distance between Bluetooth device and earbuds has exceeded
effecve range.
③Do I need to search Bluetooth earbuds and connect them to my
Bluetooth device each me for use?
No, you needn’t. Once paired, earbuds will automacally connect to
the previously connected device.
④Do I need to turn on and turn off earbuds manually before and aer
use?
5. Earbuds Wearing and Bluetooth
Connecon
5.1 Wear earbuds
①Take earbuds from charging case, and refer to “L” and “R” on
earbuds to wear them on le/right ear respecvely.
②Please try different ear ps (large / medium / small) for your own
comfortability.
③Press the earphone gently into the auricle to ensure beer
sound effect.
5.2 Bluetooth connecon
①Auto power on: The earbuds will be automacally turned on the
moment they are taken out from charging case.
And you will hear voice prompts as below:
Right: a) Power on
b) Please pair to your device
Le: a) Power on
b) Please pair to your device
...
10. FCC warnings
FCC ID No. for this device is A4X-TWST04
(1)This device may not cause harmful interference.
(2)This device must accept any interference received,including interference
that may cause undesired operaon.
②Turn on Bluetooth on your mobile device
Go to sengs→Go to Bluetooth→Turn on Bluetooth→Scan for
Bluetooth devices→Select “TWS-T04”(Voice prompt “connected”)
5.3 How to pair with another Bluetooth device
①Unpair earbuds from currently paired device.
②Follow the same pairing guideline with another device.
6. Music Playback
① Open music app on your mobile when paired.
② Tap either earbud twice to play/pause music.
③ Tap le earbud three mes to switch to the previous track, and
right earbud three mes to the next track.
②Insert the USB A end of the cable into
a charger for power.
Status LED for earbuds
Red LED: charging
LED off: fully charged
No, you needn’t. Earbuds will be auto on, when they are taken out
from charging case, and be auto off & start charging when they are
put into charging case.
⑤ If earbuds are taken out from charging case and not used for a long
me, will earbuds stay on ll baery is drained then off?
No, earbuds will turn off automacally in 5 minutes when they are
not in use.
⑥Do earbuds need to be acvated by charging case before auto
power on?
Yes. And please make sure there is enough power in charging case.
LED Status for charging earbuds:
LED will be on for 8 seconds to show
case baery level then off
Changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: