User's Manual

Wi-Fi Display
User’s Manual
‐30 ‐
 Network Setup
< IP Setup>
You can select “obtain IP address automatically” or “Use the following IP
address”
♦ IP Address: The default value is 192.168.100.10.
♦ Subnet Mask: The default value is 255.255.255.0
♦ Default Gateway: The default value is 192.168.100.10
<DHCP Server Setup>
You can select “Auto” or “Disable”. When “Auto” is selected, it will
automatically disable DHCP on MirrorOp is another DHCP server is
detected, otherwise it will enable its DHCP service.
♦ Start IP: The start IP address of DHCP Server.
♦ End IP: The end IP address of DHCP Server.
< Wireless Setup>
♦ Wireless LAN: you can select “Enable” or “Disable”
♦ Region: default value is “Worldwide”.