User's Manual

Apple watch Charger
2
5.0 OPERATION
Operation Procedures
1. Connect charger to the power adapter,
2. Place your apple watch on the charger, then watch start charge
3. Please take out the device after it is fully charged.
Note: red light for flashing when malfunction occurs.
Operation Notes
1. For optimum performance, please use charger according to this
user manual.
2. Please connect the wireless charger to a power adapter which
output 5V/1A,
3. Please unplug the charger after using.
4. Do not use the charger with an electronic product which is not
in conformity with the specifications, so as to avoid any problem
caused by specification mismatching.
5. It’s normal that charger will be a little overheated in the use
process.
6. When the charger stops working under some accidents , you need
to check whether the device is compatible with this charger.
7. Do not let the wireless charger close to fire, such as stove, candles
and etc.
8. Do not let the wireless charger soak into liquid, such as swimming
pool, bathtub, etc.
9. Do not wash the wireless charger with corrosive cleaner.
10. If the wireless charger cannot work properly, please contact the
store or distributor in your area.
6.0 CONNECTION DIAGRAM