Operating Instruction

Wireless Charger
2
Working frequency
110K-205K
Wire output specification parameters
Output specifications
Stand-up output：
USB-A/Type-C:5V3A,9V2A,12V1.5A
Multi-port output：
USB-A+Type-C:(5V3A)15W total
Short circuit protection
have
Over current protection
have
Service temperature range
0~25°C
Storage temperature range
-20 ~ 70°C
Operation humidity
10% ~ 80% RH
Store humidity
5% ~ 95% RH
4.0 PACKAGE CONTENT
Before using this equipment, please check the packaging and
make sure that the following items are included in the shipping
carton:
Wireless charger x 1
Power adapter x 1
Instruction x 1
5.0 METHOD OF USE
Flow of wireless output usage
1. Connect the wireless charger to the power adapter, then the white
and yellow lights will flash twice each, and finally the white light
will enter the normal state (standby state).
2. Place your device (which supports wireless charging) in the center
of the wireless charging disk, and the yellow light will enter the
breathing state.
3. When fully charged, the white light will stay on.
4. Please remove the device after it is fully charged.
Please note that the white light flashes when an exception occurs.
Wired output usage flow
Use standard adapter to supply power for the product, and then
use qualified charging cable to charge the device through 1/2 port.