Installation Guide

Installation: Adjustable Indoor/Outdoor Speaker Mount

Distributed by: Home Depot U.S.A., Inc.

2455 Paces Ferry Rd., NE, Atlanta, GA 30339

For assistance, call: 1-800-394-7519

HOMEDEPOT.COM

Item #1000007794

Model #2001

Visual Installation Guide

Adjustable Indoor/Outdoor Speaker Mount

Page 1 of 2

1. Hold the mounting plate to the wall in it’s correct position.

Using it as a template mark the screw hole location with a

pen or pencil.

2. Drill two holes into the mounting surface on the screw

hole locations marked.

3. Insert the plastic anchors by gently tapping them with a

hammer until they are ush with the wall.

4. Using a phillips head screwdriver, screw the mounting

plate onto the wall.

PAGE 1
Item #1000007794 Model #2001 Visual Installation Guide Adjustable Indoor/Outdoor Speaker Mount Installation: Adjustable Indoor/Outdoor Speaker Mount Page 1 of 2 1. Hold the mounting plate to the wall in it’s correct position. Using it as a template mark the screw hole location with a pen or pencil. 2. Drill two holes into the mounting surface on the screw hole locations marked. 3. Insert the plastic anchors by gently tapping them with a hammer until they are flush with the wall. 4.
PAGE 2
Item #1000007794 Model #2001 Visual Installation Guide Adjustable Indoor/Outdoor Speaker Mount Installation: Adjustable Indoor/Outdoor Speaker Mount 5. For ceiling installations only; for wall installations, skip to Step 6A. For added clearence, connect the bracket extension and tighten the screw with the allen wrench. Page 2 of 2 6A. Wall Installation: Insert adjustable link section onto the mounting plate and use the allen wrench to tighten down. 6B.