Instructions / Assembly

8
Installation (continued)
3
Testing the bolt length
4
Attaching the brackets to the
TV
□ Test the selected bolt length by screwing them
in by hand to ensure proper fit. Do not tighten. If
there is any resistance, remove immediately
and select another size of bolts (AA - FF) and
washers (GG or II).
□ Center the brackets (B and C) vertically to the
back of the TV. Ensure that the left and right
mounting brackets (B and C) are no more than
26.38 in. (670 mm) apart.
□ For curved or recessed backs, place the
spacer (LL) over the mounting holes on the
back of the TV.
□ Attach the left and right brackets (B and C) to
the back of the TV using the properly sized
bolts and washers you chose in steps 1 and 2.
CAUTION: Tighten the bolts so the
brackets are firmly attached. DO NOT
OVERTIGHTEN. This may damage your TV.
Correct
Incorrect
C
B
LL