Installation Guide

Installation: Binding Posts

Distributed by: Home Depot U.S.A., Inc.

2455 Paces Ferry Rd., NE, Atlanta, GA 30339

For assistance, call: 1-800-394-7519

HOMEDEPOT.COM

Item #1000015548

Model #5106-LA-BK/RD

Item #1000015549

Model #5106-WH-BK/RD

Visual Installation Guide

Binding Posts

Install all desired Binding Posts into keystone wall plate.Place Binding Post insert at an angle into the keystone port with

the tab up. Tilt insert up to lock in place.

Tighten each binding post to secure wires.

*NOTE* Red is positive (+) and black is negative (–).

Binding Post pair: Red (positive +), Black (negative -). Unscrew the rear portion of each binding post .

5. 6.

Remove about ½” of insulation from each speaker wire, then feed

through opening on the side of the binding post.

Page 1 of 2

PAGE 1
Item #1000015548 Model #5106-LA-BK/RD Item #1000015549 Model #5106-WH-BK/RD Visual Installation Guide Binding Posts Installation: Binding Posts Page 1 of 2 1. Binding Post pair: Red (positive +), Black (negative -). 2. Unscrew the rear portion of each binding post . 3. Remove about ½” of insulation from each speaker wire, then feed 4. Tighten each binding post to secure wires. 5. Place Binding Post insert at an angle into the keystone port with 6. through opening on the side of the binding post.
PAGE 2
Item #1000015548 Model #5106-LA-BK/RD Item #1000015549 Model #5106-WH-BK/RD Visual Installation Guide Binding Posts (continued) Installation: Binding Posts (continued) Page 2 of 2 7. Mount wall plate to low voltage mounting bracket (not included). 8. Unscrew Binding Posts to expose the front side wire feed through. 9. Remove about ½” of insulation from each speaker wire and feed 10. Tighten each binding post to secure wires. 11. 12.