Instructions / Assembly

7 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation
1
Identifying the screw diameter
to use
2
Identifying the screw length
to use
To ensure proper mounting of the brackets to your TV,
this mounting system includes several sizes of
screws (DD) and washers (EE) (M4, M5, M6, and M8)
that can be used in various combinations.
Combinations are determined by the diameter and
depth of those holes.
□ Select the screw (DD) diameter to use by
inserting the various sized screws (DD) (M4, M5,
M6, and M8) into the mounting holes in the back
of your TV.
□ Insert a straw or toothpick into one of the
mounting holes on the back of your TV.
□ Use a pencil to mark the depth of the
mounting hole.
□ Determine the proper screw length to use by
comparing the mark with the various screws
provided.
CAUTION: When the screw is longer than
the mark, choose a shorter screw.
3
Marking the mounting
locations
□ If installing in wood studs, use a commercially-
available stud finder to locate the stud centers in
the wall. Studs are usually spaced 16 in. apart.
□ Position the mounting arm (A) on the wall and use
a level to ensure that the arm is level.
□ Use the holes in the mounting arm (A) as a
template to mark the mounting hole locations for
attaching the mounting arm (A) to the wall.
M5 M6 M8M4
OR OR OR
A