Datasheet

Position the motor axis with the adaptor to the fan blade. Connect the fan blade to the adaptor.
Make sure the fan blade is firmly secured to the adaptor.
Make sure the fan blade can rotate freely.
Disconnect the red & black cables from the solar panel. Connect the red cable connected to the reversible fuel
cell to the red female plug on the motor cable. Connect the black cable connected to the reversible fuel cell to
the black female plug on the motor cable.
Make sure all the connections are correct.
Holding the motor, you can now see the blue fan spinning quickly, consuming the hydrogen and oxygen
stored in the inner gas containers (see picture below).
Note: If the fan blade stops running while there is still
hydrogen remaining in the inner gas container, this
implies the hydrogen is not pure in the container and
tube and can not be consumed completely. You can
unplug the black pin on the hydrogen side of the fuel
cell and quickly attach the pin back into the tube. You
can then see the fan running again (for more detailed
information see page 21).
Once there is no more hydrogen gas left in the inner
container, no more electricity can be produced, and
you will see the fan blade running slowly until it stops.
Disconnect the red & black cable from the motor. To
create more hydrogen and oxygen repeat the process
starting on page 14.
19 20