Datasheet

Battery pack operation instructions:

1. The removing and inserting of batteries is to be conducted by the adults only.

Unscrew the screw holding the battery pack’s cover in place using a screw driver. Once the screw is

removed open the battery pack and take out the batteries using your fingers. Do not use a metal

object. When inserting the batteries make sure that you are doing so with the correct polarity (the

positive end of the battery must match up with the “+” and the negative end of the battery must match

up with the “-” sign indicated on the battery pack), close the battery pack and secure its cover by tight-

ening the screw with a screw driver.

2. Non-rechargeable batteries are not to be recharged.

3. Different types of batteries such as rechargeable, alkaline and standard batteries or new and used

batteries are not to be mixed and should be used separately.

4. The battery pack cables are not to be inserted into an AC socket.

5. The supply terminals of the battery pack are not to be short-circuited.

6. The two spare red & black cables are not to be inserted into an AC socket.

7. Exhausted batteries are to be removed from the battery pack.