Datasheet

Robot Arm

Wired Control Box

1. Ensure all wirings are correct.(Please refer on page 23,24 )

2. If the Robot Arm does not have any response to the wired controller, please check

if the 'BATTERY' and 'GND' connectors are in right position, and also if the batteries

are placed in correct polarity.(Please refer on page 13 )

3.If the Robot Arm moves wrong direction, please check if wiring of M1, M2, M3, M4,

M5 are reversed.(Please refer on page 23,24 )

4.If the searchlight does not light, please check if the 'L' connector is correct.

(Please refer on page 23,24 )

Trouble shooting:

Circuit diagram:

41 44