User's Manual

4、 According to the wireless router (AP) that you connect to, you can modify the
parameters of wireless settings, including network name, encryption, keys and the IP
address of network settings.
5、 Modify the working mode settings, select the "enable auto-work mode" option and set
the parameters according to what you want.
6、 After modifying parameters as shown below, click "submit " and select "manually reset
later" in the pop-up dialog box.
Figure3-3 Modify parameters of UART-WIFI module
2.3 Testing
1、 Run TCP / UDP debugging software, create a TCP Server whose detecting port is