User's Manual

figure5-19 firmware upgrade
3.2 Configuration through WEB server
WEB server has been embedded in this product, it can support the function of
parameters configuration with IE browser, the method is as follow,
Notices,
1、 Make sure the module has connected to the network successfully before using web
page configuration;
2、 The default port number of the WEB server is 80，so it only needs to input address in
address column of browser，if user has modified the web server port，user must input
port number，otherwise the net can not be opened, for example when the port number is
set to 8080，the access address of the web server is http://192.168.1.20:8080；
3、 Please use Windows IE browser to access the server as well as you can；