User's Manual

figure5-22 the configuration of super terminal
2、 If the wireless module has started configuration mode（see the 4.2.1 section）or the
work mode is set to command mode，please jump to step 5 directly，otherwise，it needs
to make the module exiting the transparent transmission mode according to following
approachs at first（refer to section 4.2.2.4）；
3、 Open a notepad to edit escape character string（the default escape character is‘+’ ）
and save.
4、 Wait for the time specified by the parameter of escape time（its default setting is 2
second）， select ‘send text file’ in the ‘transmit’ menu，send escape character string file，
the module return ‘+OK’ information if success；
5、 Input ‘AT+E’ instruction to open input return display（before it, the character that user
input can not be display in the super terminal interface）；
6、 Thus，user can use super terminal program to test the most of AT+ instruction set，for
example, the command of network scan can be insteaded of inputtig ‘AT+WSCAN’, it’s
shown as the following sketch map.