User's Manual

2 Quick Start Wizard
2.1 Preparation
 Hardware
 TLG10UA03 module
 serial adapter board
 serial cable
 Software
 UART-WIFI configuration management program
 serial debugging software,such as serial debugging assistant, serial master
（ , ） and the like.
 TCP/UDP debugging software, such as TCP/UDP test tool（
TCPUDPDbg.exe
）and so
on.
2.2 Setting parameters
1、 Run the UART-WIFI configuration management program.
2、 Connect TLG10UA03 module with Serial adapter board, and then turn the power on
after the serial caple has been connected, as shown below: