User's Manual

Page 31 of 31
 Adding a known network 添加存在网络
Upon confirmation, the list of known networks stored in your phone is displayed. Highlight
any of them you want to add to the preferred network list and confirm by selecting Add.
This network will be automatically put at the end of the list of preferred networks.
 Adding a netcode 添加网络代码
Upon confirmation, you can access the editor and enter the country code and netcode
following the prompts. Confirm again and the netcode will be added to the preferred
network list.
Registering GPRS
登录
GPRS
You mobile phone supports GPRS network
3.4.9 Factory setting 出厂设置
The feature allows restoration of factory setting of your mobile phone, including quick setting,
phone setting, etc. Selecting factory setting will remove all your personal settings and only
take effect upon your confirmation.
3.5 Text message (network dependent) 短消息（需网络支持）
This feature provides a cost-efficient and convenient way of communication. You may use
this feature to send text messages to mobile phones or devices that can receive text
messages.
3.5.1 Inbox
收信箱
Text messages received by your phone will be kept in the inbox.
Test messages can be stored in the phone memory in addition to the SIM card memory (SIM
card capacity dependent). Your phone provides additional 100 positions for text messages.
You may select the memory location of high priority. If the memory location of high priority is
fully engaged, text messages will be stored in memory location of less priority.
If the inbox is empty, the display reads “List empty”.
If an "unread" icon is displayed on the right of text message in the inbox list, it indicates that
you have a new text message. When you open the message, the icon will change to a "Read"
one.
Use the Up/Down key to scroll through the inbox to view the text message list. When one
record is highlighted, the contents of the text message in question will roll over horizontally.
Select a text message and then confirm to display the details. The sender’s name/phone