Airpot Coffee Brewers SPECIFICATIONS AND OPERATION MANUAL Electrical Specifications: Model No. Volts Phase Hz. Watts Amps Receptacle Nema No. APT18 120 1 50/60 1.8 Kw APT18WT 120 1 50/60 1.8 Kw APT100WT 120/240 1 50/60 5.0 Kw Line cord included. “WT” with Water Tap, “X” for export. 15 15 23 5-15R 5-15R L14-30R Circuit Breaker 15 15 30 NOTES: APT100 Model includes twist lock plug wired for 4 wire 120/240V including Neutral and Ground.
Electrical Connection: APT18 - 120 volt, 1.8 kw - Brewers require a single use (dedicated) 15 amp grounded receptacle. APT100 – 120/240 volt, 6.4 kw - Brewers require a single use (dedicated) 30 amp twist lock grounded receptacle. TANK PRIMING PROCEDURES THESE INSTRUCTIONS ARE FOR INITIAL PRIMING ONLY AND DO NOT HAVE TO BE REPEATED FOR NORMAL OPERATION. NOTE: The Heater toggle switch, located in back of unit, or under the top cover, must be in the OFF POSITION. 1.
MAINTENANCE TIPS. 1. Remove and clean spray head at least once a week. In hard water areas, inspect and clean every other day. 2. If excessive build up of lime is present, de-lime or replace the heating tank. CLEANING INSTRUCTIONS Use a mild dishwashing detergent to clean the STAINLESS STEEL, PLASTIC BREW FUNNELS and AIRPOTS. Rinse thoroughly.
PARTS LIST - AIRPOT APT18 (120V) APT18WT (120V) QTY APT18WT-X (220V) 1 0 1 0 1 1 0 1 0 1 1 0 0 1 0 3 1 1 0 0 1 0 1 0 1 0 1 0 1 1 0 1 0 0 1 0 0 0 1 0 1 1 1 1 2 0 0 1 1 0 0 1 1 0 1 1 1 1 2 0 0 1 1 0 0 1 1 1 1 2 1 1 0 0 0 1 1 1 0 0 0 1 1 1 1 1 1 0 0 1 1 0 0 1 0 0 1 0 1 1 1 2 0 0 1 0 0 1 0 1 0 1 0 0 1 1 1 1 1 0 2 0 2 0 1 4 1 1 2 1 1 0 2 0 2 0 2 0 1 0 0 0 1 1 1 1 2 1 1 2 1 1 1 6 0 1 0 1 1 6 0 1 0 1 1 2 1 2 1 2 1 6 0 1 0 1 1 2 1 2 1 6 1 1 1 1 0 2 1 1 1 1 1 1 0 2 PART # DESCR