Corp. Fryer User Manual

ManualsBrandsCecilware ManualsFryerF-100

STANDARD FEATURES:

• All stainless steel body and filter housing construction.

• 1/4 HP heavy-duty reversible pump & motor.

• Built-in suction line heater with indicator light for solid shortening.

• 5-foot (1.5 meter) flexible, sanitary, high temperature hose and heat proof handle assembly.

• Easy to remove pleated filter cartridge for super fine filtering.

• Built-in thermal reset switch.

• Four heavy-duty swivel casters allow easy movement.

• Filters 50 lbs. of oil in 5 minutes.

MODEL # OIL CAPACITY VOLTAGE SHIP WT.

F-60 60 lbs. 120v/60/1 85 lbs.

F-100 120 lbs. 120v/60/1 95 lbs.

F-150 150 lbs. 120v/60/1 105 lbs.

FRY-SAVER® Oil Filtration System

Operation & Service Manual

Cecilware Corporation

43-05 20th Avenue ~ Long Island City, NY 11105

Tel: 800.935.2211 718.932.1414 Fax: 718.932.7860

www.cecilware.com customer.service@cecilware.com

Since 1911

NM47A

Summary of content (8 pages)

PAGE 1
Operation & Service Manual FRY-SAVER® Oil Filtration System MODEL # OIL CAPACITY VOLTAGE SHIP WT. F-60 60 lbs. 120v/60/1 85 lbs. F-100 120 lbs. 120v/60/1 95 lbs. F-150 150 lbs. 120v/60/1 105 lbs. STANDARD FEATURES: • • • • • • • • All stainless steel body and filter housing construction. 1/4 HP heavy-duty reversible pump & motor. Built-in suction line heater with indicator light for solid shortening. 5-foot (1.
PAGE 2
FILTER CARTRIDGE DIRECTIONS: To insert or replace the filter cartridge in the unit, follow these simple steps: 1) Remove cartridge support assembly by lifting straight up, and applying a twisting motion. Discard the used cartridge. Wipe machine down with a clean cloth. DO NOT USE WATER OR OTHER CLEANING SOLUTIONS WHEN CLEANING THE FRY-SAVER®. 2) Place the cartridge support assembly over the center tube in the filter tank. Push down until the cartridge support rests on the bottom of the tank.
PAGE 3
) Place the nozzle in the cooking oil approximately 2 inches. DO NOT REST THE NOZZLE ON THE BOTTOM OF THE FRYER. This will prevent the nozzle from becoming clogged with solid particles. 4) Turn the control switch to "FILL", keeping the nozzle tip submerged as oil is pumped into the filter. 5) When most of the oil is transferred from the fryer to the filter, turn the control switch to "OFF" and clean the fryer as you normally would. DO NOT TRANSFER WATER AND SOLID PARTICLES FOUND ON THE BOTTOM OF THE FRYER.
PAGE 4
FRY-SAVER® Trouble Shooting Guide Trouble 1) FRY-SAVER® does not start Cause Solution Power “OFF” Check that power cord is plugged into the proper outlet and the outlet has current. Check that the “Fill-Filter” switch is in the “OFF” position. Re-set the circuit breaker Circuit breaker on the unit may be “OFF” by pressing the button and holding it for 5 seconds. 2) FRY-SAVER® will not fill Pump may be jammed Use hand crank to manually release the pump.
PAGE 5
Page 5
PAGE 6
FRY-SAVER® by Cecilware Spare Parts Price List Page 6 Cecilware Part # 20000 20003 20005 20020 20025 20026 20030 20035 20045 20050 20055 20065 20066 20070 20085 20086 20090 20095 20100 20125 20130 Blickman Part # F-101 20000/3 F-121 F-134-NB F-135 F-135-NUL F-140 F-141 F-143 F-144 F-145 F-146 F-146 -NUL F-147 F-151 F-151-NUL F-152 F-156 F-157 F-171 F-172 20135 F-181-V 20135 F-181-H 20140 20145 20150 20155 20160 20165 20170 20175 20180 20185 20190 20195 20200 20205 20210 20215 20220 20225 20230 F-18
PAGE 7
20080 Page 7
PAGE 8
QUICK TIPS 1. 2. 3. 4. 5. 6. 7. 8. BEFORE FILTERING – TURN FRYER OFF TO COOL THE OIL BELOW 300◦. TURN ON THE PRE-HEAT SWITCH LOCATED ON THE FRONT OF THE CONTROL BOX. WAIT AT LEAST 15 MINUTES BEFORE FILTERING. TURN PRE-HEAT SWITCH OFF BEFORE FILTERING. DO NOT STICK NOZZLE TO THE BOTTOM OF THE FRYER. WHEN YOU HAVE REMOVED MOST OF THE OIL FROM THE FRYER, TURN OFF THE FRY SAVER AND INSERT THE NOZZLE THRU THE COVER.