Troubleshooting guide

22. Blower Diagnostics – This parameter will monitor the status of the blower motor and display a warning if it senses a
problem. The default setting for this parameter is OFF.
23. Displayed Units – This parameter determines whether the displayed units of measure are English or Metric. If the
Displayed Units parameter is set to English then all temperatures are displayed as Degrees Fahrenheit and all volumes
are displayed as Fluid Ounces. If the Displayed Units parameter is set to Metric then all temperatures are displayed as
Degrees Celsius and all volumes are displayed as Milliliters. The default setting for this parameter is English
.
24. Clock Settings – Need to set clock date (DAY, MONTH and YEAR) at the beginning life of the machine.
25. Default Values – Resets all parameters to FACTORY SETTINGS.
13