Troubleshooting guide

14. Dispenser

repeats cycle

a) Touch Pad defective.

b) Power [Dispense] Relay stuck.

a) Replace Touch Pad.

b) Replace Relay.

15. Noise coming

from mixing

chamber

a) Whipper blade not properly aligned or

missing.

a) Check blade alignment, if needed replace blade and mixing

chamber.

16. Grinding noise

coming from

unit

a) Hopper not properly engaged in back, or

Hopper not seated properly

a) Check the mating between the auger motor’s

gear and hopper’s coupling/nut. Check also pin in base.

Pin must be dropped into hole in base.

17. Banging or

clicking noise

coming from

hoppers

a) One or more Hoppers are empty or almost

empty.

a) Fill Hoppers with product.