Technical Data Bulletin

Advanced Building Products
CedAir-Mat Roof Ventilation Mats 07 72 73 - 2
1.2 RELATED REQUIREMENTS
Specifier Notes: Edit the following list of related sections as required for the Project. Limit the list to
sections with specific information that the reader might expect to find in this Section, but is specified
elsewhere.
A. Section 07 72 00 – Roof Accessories.
1.3 REFERENCE STANDARDS
Specifier Notes: List reference standards used elsewhere in this Section, complete with designations
and titles.
A. ASTM International (ASTM) (www.astm.org):
1. ASTM D 5035 – Standard Test Method for Breaking Force and Elongation of Textile
Fabrics (Strip Method).
2. ASTM D 5261 – Standard Test Method for Measuring Mass per Unit Area of Geotextiles.
3. ASTM E 84 - Test Method for Surface Burning Characteristics of Materials.
4. ASTM D 4716 – Standard Test Method for Determining the (In-Plane) Flow Rate per Unit
Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head.
1.4 SUBMITTALS
Specifier Notes: Edit the Submittals article as required for the Project. Delete submittals not required.
A. Comply with Division 01.
B. Product Data: Submit manufacturer’s product data, including installation instructions.
C. Samples: Submit manufacturer’s sample of roof ventilation mats, minimum 6 inches by 6
inches.
D. Manufacturer’s Certification: Submit manufacturer’s certification that materials comply with
specified requirements and are suitable for intended application.
E. Warranty Documentation: Submit manufacturer’s standard warranty.
1.5 QUALITY ASSURANCE
A. Manufacturer’s Qualifications: Manufacturer regularly engaged, for a minimum of 5 years, in the
manufacturing of roof ventilation mats of similar type to that specified.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Delivery Requirements: Deliver materials to site in manufacturer’s original, unopened
containers and packaging, with labels clearly identifying product name and manufacturer.