User's Manual

Page 26
DECLARATION OF CONFORMITY
Date of issue 18 April 2016
Equipment CEDAR DNS 2
Manufacturer CEDAR Audio Ltd
Address 20 Home End, Fulbourn, Cambridge CB21 5BS, UK
This is to certify that the aforementioned equipment, when used in accordance with
the instructions in this manual, fully conforms to the protection requirements of the
following EC Council Directives: on the approximation of the laws of the member
states relating to:
■
2004/108/EEC Electromagnetic Compatibility Directive
Applicable standards: EN 61000-6-1:2007
EN 61000-6-3:2007+A1:2011
■
2006/95/EC Low Voltage Directive
Applicable standard: EN 60065:2002+A12:2011
In order to comply with EMC regulations, you must connect the DNS 2 using metal-
shelled connectors and good quality shielded cable.
Restriction of Hazardous Substances (RoHS) Directive
All hardware products and sub-assemblies manufactured by CEDAR Audio Ltd
are designed to be compliant with Directive 2002/95/EC, Restriction of Hazardous
Substances. The manufacturing processes include the assembly of purchased
components and/or sub-assemblies from various sources. Any statement of
RoHS compliance made by CEDAR Audio Ltd may be based, in part or in full,
on statements provided by suppliers. Thus whilst every effort is made to ensure
compliance, CEDAR Audio Ltd may not have undertaken independent tests to
establish the compliance of such components and/or sub-assemblies.
Waste Electrical and Electronic Equipment (WEEE) Directive
In accordance with Directive 2002/96/EC, Waste Electrical and Electronic
Equipment, CEDAR Audio Ltd will provide its customers with information about
local organisations that can reprocess CEDAR products that have reached their
end of use. Alternatively such products can be returned to CEDAR Audio Ltd in the
UK at the owner’s cost and they will then be reprocessed correctly free of charge.