SDS

ManualsBrandsCedar Impressions ManualsBuilding materialsDouble 9" Granite Gray Staggered Rough-Split Shakes

Safety Data Sheet

Section 1: Identification

Product identifier

Product Name

•

Molded Products CT10100-1

Synonyms

•

CertainTeed & Vytec branded Polymer Shakes & Shingles

Relevant identified uses of the substance or mixture and uses advised against

Recommended use

•

Consult manufacturer for the recommended product use

Details of the supplier of the safety data sheet

Manufacturer

•

CertainTeed Siding Products Group

20 Moores Road

Malvern, PA 19355

United States

Telephone (General)

•

610-893-6000

Emergency telephone number

Manufacturer

•

1-800-424-9300 - CHEMTREC - US/Canada

Manufacturer

•

+01 703-527-3887 - CHEMTREC - International

Section 2: Hazard Identification

United States (US)

According to: OSHA 29 CFR 1910.1200 HCS

Classification of the substance or mixture

OSHA HCS 2012

•

Not classified

Label elements

OSHA HCS 2012

Hazard statements

•

No label element(s) required

Other hazards

OSHA HCS 2012

•

Under United States Regulations (29 CFR 1910.1200(c) - Hazard Communication

Standard), the product(s) listed above are exempt as article(s) under stated normal

conditions of use.

Other information

•

As an article this material does not legally require an SDS.

Section 3 - Composition/Information on Ingredients

Substances

Molded Products CT10100-1Molded Products CT10100-1Molded Products CT10100-1Molded Products CT10100-1

Preparation Date: 27/June/2007Preparation Date: 27/June/2007Preparation Date: 27/June/2007Preparation Date: 27/June/2007

Revision Date: 29/July/2016Revision Date: 29/July/2016Revision Date: 29/July/2016Revision Date: 29/July/2016

Format: GHS Language: English (US)Format: GHS Language: English (US)Format: GHS Language: English (US)Format: GHS Language: English (US)

OSHA HCS 2012OSHA HCS 2012OSHA HCS 2012OSHA HCS 2012

Page 1 of 7Page 1 of 7Page 1 of 7Page 1 of 7

Summary of content (7 pages)

PAGE 1
Molded Products CT10100-1 Safety Data Sheet Section 1: Identification Product identifier Product Name • Synonyms • CertainTeed & Vytec branded Polymer Shakes & Shingles Molded Products CT10100-1 Relevant identified uses of the substance or mixture and uses advised against Recommended use • Consult manufacturer for the recommended product use Details of the supplier of the safety data sheet Manufacturer • CertainTeed Siding Products Group 20 Moores Road Malvern, PA 19355 United States Telephone (Ge
PAGE 2
Molded Products CT10100-1 • Material does not meet the criteria of a substance. Mixtures Composition Chemical Name Polypropylene Compound Antioxidant/Stabilizer Colorant Identifiers NDA NDA NDA % 99% TO 100% 0.1% TO 1% < 1% Section 4: First-Aid Measures Description of first aid measures Inhalation Skin Eye Ingestion • First aid is not expected to be necessary if material is used under ordinary conditions and as recommended. If signs/symptoms develop, move person to fresh air.
PAGE 3
Molded Products CT10100-1 Personal precautions, protective equipment and emergency procedures Personal Precautions • No special precautions expected to be necessary if material is used under ordinary conditions and as recommended. • No emergency procedures are expected to be necessary if material is used under ordinary conditions as recommended. Use normal clean up procedures. Emergency Procedures Environmental precautions • No special precautions necessary.
PAGE 4
Molded Products CT10100-1 Vapor Pressure Not relevant Evaporation Rate No data available Vapor Density Not relevant Flammability Flash Point 660 °F(348.8889 °C) UEL No data available LEL No data available Autoignition No data available Flammability (solid, gas) No data available Environmental Octanol/Water Partition coefficient No data available Section 10: Stability and Reactivity Reactivity • No dangerous reaction known under conditions of normal use.
PAGE 5
Molded Products CT10100-1 Inhalation Acute (Immediate) • Under normal conditions of use, no health effects are expected. • No data available Chronic (Delayed) Skin Acute (Immediate) • Under normal conditions of use, no health effects are expected. • No data available Chronic (Delayed) Eye Acute (Immediate) • If product is cut, particles may be generated which could cause mechanical irritation to the eyes.
PAGE 6
Molded Products CT10100-1 Section 15 - Regulatory Information Safety, health and environmental regulations/legislation specific for the substance or mixture SARA Hazard Classifications • None United States Labor U.S. - OSHA - Process Safety Management - Highly Hazardous Chemicals Not Listed U.S. - OSHA - Specifically Regulated Chemicals Not Listed Environment U.S. - CAA (Clean Air Act) - 1990 Hazardous Air Pollutants Not Listed U.S.
PAGE 7
Molded Products CT10100-1 determine the quality and suitability of the product. Supplier expressly disclaims any and all liability for incidental and/or consequential property damage arising out of the use of this product. No information provided shall be deemed to be a recommendation to use any product in conflict with any existing patent rights. Read the Safety Data Sheet before handling product.