Manual

Page 16
Setup
Press menu followed by S3 to access the Setup pages.
Page 1
Page 2
• Select a setup option using encoder 1.
• Edit the selected option using encoders 2 to 5, as available.
Username and password
Use these elds to set the case-sensitive username and password that will be requested
by web browsers to enable remote control of the unit. The defaults are:
Username: DNS8D
Password: DNS8D
Note for network administrators:
The DNS 8D is intended for use on private networks only. The username and password
help to prevent unuthorised changes of settings but do not protect the unit from
malicious network attacks.
DHCP On/Off
Dynamic Host Conguration Protocol automatically sets up the unit to work on your local
network. No manual changes to the addresses are possible in this mode When On,
DHCP determines the Address, Netmask and Gateway.
When Off, you may set these manually.
Note for network administrators:
The DNS 8D sends its serial number as its host name in DHCP requests. If your DHCP
server registers host names in the domain name server, you can access your DNS 8D
as dns-8-xxxxx.yourdomain.com instead of directly by its numeric IP address.