Manual
Page 21
FIRMWARE UPDATES
The DNS 8D rmware may be upgraded over the network using a standard web
browser.
Determine the address of your DNS 8D by inspecting the Status window, then launch
your browser and type the following into the address bar…
xxx.xxx.xxx.xxx/update.html
…where xxx.xxx.xxx.xxx is that address.
The following screen (or a similar one performing the same function, depending upon
browser) will appear.
Click on Browse and select the new rmware le, which will have been downloaded
from the web or sent to you directly by CEDAR Audio Ltd.
When the upload is complete, the DNS 8D’s front panel will instruct you to power cycle
the unit. You must do this by removing the power cable or by switching off the power
at the mains before switching the unit on again. (Switching off using the front panel
controls will not be sufcient.)
If there is a problem with the selected le or you have selected the wrong le, you will
again be instructed to power cycle the unit to reboot it.