Manual

Page 8
OPERATION
Power/Lock
The DNS 8D switches on automatically when power is applied. This guarantees that it
reboots after a power failure. Switch it off by pressing and holding the power/lock button
for about three seconds. The current settings will be stored during shutdown. If the unit
is not shut down correctly, settings may not be stored.
Press the power/lock button briey to lock the soft keys (menu, shift, S1, S2 and S3)
and the encoders. Hold down the same button for around three seconds to unlock the
controls. You must unlock the panel to be able to shut down the unit.
Menus
Press the menu button to enter the menu system for advanced operation.
Shift 5
Hold the shift key to show alternative functions. Press it briey to switch between the
normal and alternative functions.
Soft keys (S1, S2, S3)
When rst switched on, the soft keys perform the following tasks:
S1 (DNS On)
Click: toggle the current channel/group on/off
Shift-click: toggle global on/off
S2 (Learn)
Click: start learning on the current channel/group.
Click again to stop
Shift-click: toggle global learn
S3 (Detail)
Click: toggle between Detail and default (summary) views
Press/hold/release: preview the detail of the current channel/group on the main screen