Owner`s manual

Page 9
AES/EBU Input
The digital input XLR 3-pin socket has an impedance of 110Ω. It has the following
connections:
n
Pin 1: Screen.
n
Pin 2: Signal +ve (hot)
n
Pin 3: Signal -ve (cold)
SPDIF Input
The SPDIF input has an impedance of 75Ω.
Outputs
Analogue Outputs (Left and Right)
The XLR 3-pin output connectors are electronically balanced with an output
impedance of less than 50Ω. They have the following connections :
n
Pin 1: Screen.
n
Pin 2: Signal +ve (hot)
n
Pin 3: Signal -ve (cold)
RCA phono Outputs (Left and Right)
The RCA (phono) outputs are unbalanced and have an output impedance of less
than 75Ω.
Output Level Adjustment
The output gain can be adjusted individually for the left and right channels
using the rear panel DIP switches. Each output gain can be set such that a full-
scale digital output provides +12, +18 or +24dBu output on the analogue XLR
connectors.
The level at the unbalanced output is 10dB lower than at the balanced output.
AES/EBU Output
The digital output XLR 3-pin socket has an impedance of 110Ω, and output signals
comply with IEC 60958. The socket has the following connections:
n
Pin 1: Screen.
n
Pin 2: Signal +ve (hot)
n
Pin 3: Signal -ve (cold)
SPDIF Output
The SPDIF output has an impedance of 75Ω.