Service manual

ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
6
PROGRAMMING CONTINUED…
LOCATION #00
Digit 1:
Always 0. Not used in this model.
Digit 2:
0 No incoming calls allowed.
1 Incoming calls allowed.
Digit 3:
0 Use narrow dial tone detect window.
1 Use wide dial tone detect window.
Digit 4:
0 Time-out disconnect enabled.
1 Time-out disconnect disabled.
Digit 5:
0 Time-out of 1.5 minutes.
1 Time-out of 3.0 minutes.
*Do not stop your programming sequence yet, however. You must now enter the
numbers to be auto-dialed.
3.8 LEFT BLACK CALL BUTTON
To program the number to be automatically dialed by the left hand call button,
enter # 1 9, followed by the desired number. The number may be up to eleven
(11) digits in length. Example: #1918005551212. When the left button is
pressed, the number 1-800-555-1212 will automatically dial out.
3.9 RIGHT BLACK CALL BUTTON:
To program the number to be automatically dialed by the right hand button, enter
# 0 1 followed by the desired number. The number may be up to eleven (11)
digits in length. Example: #01911. When the right button is pressed, the
number 911 will automatically dial out.